Garden & Power Tools

Just the worst customer service. I asked a simple support question and seven days later I am still awaiting a response. I have sent follow… Read more

reminders, engaged with the chatbot and emailed direct but Hoselink is clearly not interested in engaging with customers or providing any support. Steer clear of this product.

After buying cheap chinese pumps that each lasted no more than a year or so, I bit the bullet and paid 10x more for a Grundfos. No regrets at all. It's worked perfectly for 10 years now and is still going well.

Quick service friendly confident he was helpful and professional. We would go there again.

My husband is very happy with our purchase. We have just bought a caravan and needed one for off grid. Easy to start. Great purchase and quick delivery. Show details

Pump works great. Easy to reset once tank was empty. Would recommemd. Show details

Absolutely love our I force 12 heat pump. It is sufficient and effective heating our 27,000 litre pool 6.5 by 3m. Quick to heat up to set temperature and very quiet. We have used our pool in the cooler months and have loved it! Highly recommend.

Recently installed this system. It works well, quiet and will work very well with a solar blanket Show details

It I great – Is a great welder for decent size jobs and great on gas Show details

I love it and it did a great job at our place Show details

I have used these machines for several years now most days and sometimes flat out all day. Personally have not seen one fail. I had to hunt high and… Read more

low across Australia to find a remaining one of these superseded models. Absolutely amazing little welder for the price! I would not have the new model for no other reason than the very loud fan that runs full noise for at least 5 full minutes every time it strikes an arc irrelevant of temperature. Very annoying in a quiet workplace like a home workshop. I actually bought the new model and returned it in disgust, It totally contradicts the advertised “smart fan” feature that Unimig advertises with the new model. What a shame. If you can find the KUM-M-RTIG200ACDC buy it and dont sell it! I Awesome welders so much better than the new model in my opinion.

Excellent service quick response, good quality pumps, highly recommended thank you

I'm really happy with the results. The plants look healthier, the leaves are greener, and I've noticed plenty of fresh new growth. It's very easy to… Read more

apply, and I like that it provides a steady, slow-release feed without any fuss. It has become part of my regular plant care routine because it keeps my houseplants looking their best.

Great product. Factory sharp. Nice handle to hold and great colour. Gets a good cut first go and has a since swing

Best gasless mig wire ever. Bakes through gal without having to grind back first and leaves a perfect weld every time.

Every bit as good as advertised. I should have chosen a longer one.

great welder – Purchased this unit as a work item needed for welding RSJ and fence posts. It totally out performed my old welder and lays great welds using fluxcore wire. Great price, great unit, thoroughly recommend this product. Show details

Great pump has been supplying a house for over a year and a half now. I love the fact that you can connect a generator to it as well for those long… Read more

cloudy periods. The pump is made really good quality part and it’s perfect for our residential situation.

I tried the Atlas Log Splitter.. my first impressions were that it was of good quality amd craftmanship. After using it it cut through the logs… Read more

quite easily without it being too difficult. My only issue was the weight of the log cutter itself being a bit heavy for me. Other than that a great product!

I have been provided this product and asked to give my honest opinion.

Hi I found the Cigweld BlueVenom XF200P3 very good to use, especially the auto selection where you just code in, the material you are using and the… Read more

thickness and this machine automatically select the correct Amperage. The pictures show where I modified this aluminium toolbox to fit a fridge the welding came out very good.

Where to start? Bulk and heavy compared to other products. Filters are very fiddly to replace. The foam rollers get hyper-dried out, turning them… Read more

into flotation devices. Before the machine will sink and do its job, you need to spend quite a while first "massaging" the rollers to get them to start soaking up water. Both drive belts snapped. The cord twists around itself in normal operation *very* quickly, and is very difficult to straighten out (hint - for goodness sake, buy a cordless model of whatever brand you get). The constantly twisted cord reduces the robot's operational range and at times threatens to pull the controller into the water. The connector housing where the cord goes into the body of the controller became loose very quickly, and with all the cord twisting, it eventually severed the electric wires completely, thus rendering the machine unusable. The carrier supplied by Robotek began rusting almost immediately. The climb function can't deal with curved steps, and would often get hung up at an awkward angle. The mapping function is poor, with the machine focussing on one half of the pool and largely ignoring the other half. The device can't handle leaves from palm trees and struggled with slightly larger leaves such as those from some magnolia trees nearby. At the end of the day, any labour time the device saves you is cancelled out by the the effort of managing this device and the fact I had to finish the job properly with the traditional pool vacuum/brush. Positives: the filter bags, though painful to install, picked up fine dirt and sand well, and are machine washable.

I know my mig is no longer available but it is still going strong. I am using it in an all steel extension of my mancave. Working up at 3 meter heights is no problem. Love my unimig. Show details

I've maintained 2 chlorine pools, 2 salt water pools and an Enviroswim. The Enviroswim isn't zero maintenance but it has been the easiest to… Read more

maintain. I've spent insignificant amount of chemicals compared to salt and chlorine pools. Even if it were the HARDEST and most expensive to maintain, I'd still buy it, because it's fresh water. I've drunk it. I'm about to install Enviroswim in another pool.

My favourite thing about it is the reactions from friends. To them it's like magic.

I think very poor quality. Clips will for sure snap with the heat and sun. Great idea but not followed thru with quality Show details

Great pump. Easy install. All in one.would buy again. Value Show details

Lightweight compared to other mowers I've used. No bending over to start, no choke or fuel to mess with, I just leave the fuel on and pull the cord… Read more

from a standing position and it goes. Starts first time hot or cold. The plug in hose deck wash feature is a nice touch. Fairly quiet and fuel efficient. I have 1500sqm sloping block which the mower handles with ease. Highly recommend!

Nice compact and easy to use welder. Really good at being able to wind down the amperage for small jobs. Just what I needed! Show details

Purchased in 2024. Has been returned 4 times. Still not working. Software indicates basket full. Reality is basket take-up clogged. Maytronics… Read more

maintain that becausemajor parts replaced have not had to rbe eplaced again, Maytronics will not provide a refund. They consider that NSW consumer law does not reply to them! In my opinion the S400 is rubbish. Now Matronics will not respond to my emails. AFTER SALES SERVICE (?) IS NON-EXISTENT

Maintains a 1500sqm yard with ease. Smashes the weeds, plenty of power and much quieter than the two strokes I have used. Starts first time, ergonomic to use, awesome bit of kit. Show details

I purchased the 180 amp inverter welder as an upgrade and replacement for my old (1985) 140 amp AC stick welder. The new welder has a better duty… Read more

cycle and it is much easier to strike an arc and it produces very smooth welds with less spatter than the old welder. The control panel allows for fine and accurate control of the welding amperage. The machine is light weight and easy to carry and the power and welding leads are a decent length (3m and 4m) and the ground clamp and electrode holder are heavy duty. The first practice project was to fabricate a lift for cleaning under the ride-on mower and the welder produced good welds once I worked out the best amperage for the tubing size. I'm very happy with the machine so far and have got several projects ahead.

Seeing the reviews of poor customer service, delayed delivery and being kept in the dark I called to ask when a specific garden bed would be back in… Read more

stock - explaining I did not want to wait too long and was concerned by the reviews. I was told 'the marketing team will notify when back in stock' several times. I asked if they were waiting on imports and told no all made in Australia. I repeated I just want an idea how long and whether it is worth waiting or not and was again told marketing team will notify etc etc. I asked to speak to marketing team. Told no the marketing team will notify...

If these are locally made, then it should not be hard to say when an item is being manufactured. Disappointed however, I won't be buying from this company, especially given previous reviews.