Epson Electronics

Decent picture but… – It is a decent unit, even projecting on to a standard painted wall however the fan is very loud. My biggest gripe is the cost of the replacement… Read more

lamp. Despite what they say, these lamps have a relatively short lifespan before you have issues but the worst part is, is Epson Australia no longer stock the lamps themselves (when they did they cost A$65) and replacement lamps purchased through third parties are about A$150 plus shipping. It has turned me off Epson products simply due to parts availability beyond 4-5 years.

Use to love Epson. Had a dot printer years ago. This one worked great when we first bought it but after that it was one big fail. We only print every… Read more

now and then. When we went to use it months later the heads were blocked. After troubleshooting online it said it was a common problem and the ink tank printers needed to be used constantly to avoid blockages. I ran it through a couple of cleans but no improvement. It recommended as a last resort to run it through a deep clean. The deep clean uses a lot of ink. The ink bottles may last a long time but they are very expensive to replace when the time comes.

Worst printer I have ever owned – Worst printer I have ever owned. I have to clean the heads multiple times just to print a clear page. This seems to be a known issue ... don't buy one.

Glitchy, needs head cleaning all the time all round rubbish – I'll never buy another Epson. This one uses expensive cartridges and I get very little in return. After printing perhaps 20 pages of strictly black… Read more

and white printing it tells me that it's out of ink and won't print any more. This printer has used a lot of cartridges in the time I've had it (cartridges, as opposed to ink) and don't very little printing. It would be far far far cheaper to just go to the library in town and do my printing than persist this with this rubbish.

I’ve change the ink cartridges twice and it’s skipping lines like every print. Easy to use but print quality is rubbish. Ink cartridges don’t last… Read more

long and the overall experience is bad. I’m going to throw this out and get a much more reliable printer.

Can't believe how Office Works sell this printer. It continually stops printing after first page or being idol. Time waster! Show details

Very spasmodic with its connection to WiFi and does not have option for cable. Too frustrating when you just want to print and run. Show details

Don't waste your money – Bought this one year ago to save money by not having to pay for ink cartridges You buy ink and fill up four containers on the printer The quality of… Read more

printing compared to a printer with an ink cartridge is quite frankly crap.

I have had numerous communication errors with this printer requiring me for hours to delete the driver and reinstall it, and call Epson for support

The biggest negative for me is the printer has no heads up display- no LCD window. Just some dinosaur era buttons. It makes spurts and noises and you have no bloody idea what it's doing.

The number of times I have got an error on my laptop and then feel like killing myself due to hours spent trying to work out what's wrong with the stupid freaking printer is really absurd.

Do not get this printer. After a while you have to do an aggressive printer rest and cleaning of the nozzles that burns through a crap run of your ink, negating any savings you thought you were making by going cartridge free. I still have it and after 1 month of no use I started it up again and it won't even print a single page- it's like the page is 1/10 of the darkness and there are lines missing throughout the entire page. So here I am back again trying to diagnose this nasty bloody printer. Waste of time and money.hate it.

I bought this printer 13 months ago only for it to stop working. Contacted epson and they said the ink pad is full, it’s not a user replaceable part and to have it replaced at a service centre is more than the printer cost. Absolute scam! Show details

Fantastic after sales support from Epson – Unit quickly developed a faulty pixel. Epson replaced the unit with a completely new one. Bravo Epson

About to throw it out. A piece of rubbish. I print only in black and white, but it uses all the colour cartridges up?! and Wi-Fi connection is always… Read more

dropping out, even though the router is right next to it! I have to reconnect with every print job! even if they are seconds apart. DO NOT BUY... Very frustrating.

Absolute disaster from day one. Spent hours fiddling with settings, reconfiguring, reading google help, cleaning the print heads etc, etc and the print quality was abominable if it printed at all. Do not buy!!! Show details

Was helping an old couple get their printer working. Is such rubbish. Poor english, required two apps to install to my iPhone for setup. Needed… Read more

chatGpt to tell me the correct buttons to press to enable connection to an AP, as neither the printed instructions nor Epson’s infuriating online guide was correct.

It would be easier and quicker to try and make a 1920 typewriter print from your PC that getting one of these pieces of trash to work. Hand down one… Read more

of the worst product ever made in the world. Avoid this product - do not buy. Write your letters by hand, it would be better than trying to deal with this printer.

The print quality is excellent, and I have used the 16600 for printing many documents. HOWEVER, the A3 duplexer has a serious issue, nicking the… Read more

middle of the short edge of every page on the return trip. I have now had two units of ET-16600 (and three duplexers - I had one replaced), and they have all consistently had the same problem with the duplexer page nicking. In a large document, it results in an ugly river of identical v-shaped creases through all the pages. A workaround is to print only on one side odd numbered pages, and then carefully reverse and feed in the resulting stack and print all the even pages (painful, for a 500 page book). The print quality is so good that it's almost worth it. If you can trim an inch off of the ends of pages (for example with bookbinding), then the duplexer issue can be ignored. The attached photo is the very first print from the second (brand new) ET-16600 unit that I have owned; the creasing is identical to that of the first unit and first two duplexers.

Good printer, economical printing. I really like the InkTank bottles, and they are easy and mess free. Had the printer for over 1 year without any… Read more

problems. My only issue is the awkward access to the output tray for finished printing. It is tricky to remove your printing unless you can access it from the rear. We bought this printer for the document feeder and duplex printing. Only does single sided scanning though.The ink for all Pro series InkTank printers is pigment ink, so it doesn't fade or run like dye inks do. We had a Brother before, and had to discard it when the non user replaceable waste ink pad filled up. The Epson has a replaceable waste ink tank that only costs about $15. The ink is really good value as well. Really happy with this printer and would recommend for home office.

OK but not up to expectation – This scanner is compact and easy to use but still gives grainy unreadable results even when the receipt/document is in perfect condition. Show details

Don't Waste Your Money – For $268.47 from Big Red Tech through Kogan I was expecting a few bells and whistles. I should have checked the specs far more thoroughly. The print… Read more

quality is about the same as my last $35 printer. There are no features, except printing, not even Wi Fi! The single most absurd complaint is the USB connection, apart from being the ONLY way to connect the printer, it uses the most obscure USB socket and it is NOT included with printer. Don't waste your money, the extra ink storage is not worth it.

Has been a terrible printer that always faulters. Contacted Epson support today for assistance & they were useless & clearly didn't care. What a waste of money. AVOID EPSON LIKE THE PLAGUE! Show details

I can't believe I threw away $500 on this useless printer – Purchased when they were first released I had high hopes for this printer but those hopes were very short lived. The set-up process was easy in every… Read more

respect but the fun stopped there. I purchased this model for photo printing primarily & quickly realised that the image quality was not great & it was very slow to print. Within a few weeks the images had developed lines throughout & no amount of cleaning cycles would fix it. I contacted Epson & was told to do all the things I had already done to no effect so I took Epsons advice & repeated the process with no success until the eventually I gave up. I spoke to several printer service people who invariably told me it was not fixable & that I might as well bin it. But it cost me so much money I just had to find a way to fix it but never could & it has sat on my desk ever since gathering dust. I'm not a wealthy man & I get upset whenever I think of the money Iost to Epsom over this very expensive and unusable printer. I cannot recommend any Epsom product after my experience with firstly their printer & secondly their dismissive attitude to my problem. As stated above I'm not a wealthy person & saved money for a long time for what was supposed to be a quality product. Unfortunately it seems I chose very poorly and lost my money to this utterly useless printer. Never again Epson.

Not worth the ink it costs to print – I've had this printer for a couple of years now. Little use. Didn't have too many issues until today. Replaced 3 x Epson 202 Colour STD Capacity… Read more

Cartridges 21/2/24 - All Good. Replaced Black Cartridge 1 week later, 28/2/24 again with an Epson 202 Black STD Capacity Cartridge. Problem, no Black print. Performed Print Nozzlehead Check which showed all 3 Colours printing just No Black. Ran the print head clean as suggested on the screen, still No Black. Did this 4 times in all without any success, can't do any more as ALL Print Cartridges are now Empty! Biggest waste of money ever - AUD$82.76 in total ($20.69 each from Officeworks). Epson customer service suggests I take the printer to a service technician (out of warranty), possibly a printhead nozzle issue. That's not going to happen unless Epson refund me the cost of the new Inks just purchased, it'll be thrown out before I spend another cent on it. FYI. Will not print Black if any of the other 3 colour cartridges are out.

I can’t believe this product is still on the market – This is my second Epson printer. Had an Epson about 10 years ago and replaced it with a HP. When the ECO tanks came out I purchased an HP that worked… Read more

perfectly, after a few years I gave it to my grandson and it still works. I purchased the Epson ET-5170 as a replacement on 9/28/22, first problem occurred 3/20/23, the printer started crunching up the tray paper then stopped printing. I lost 3 days of work working with Epson IT to straighten it out. Periodically it still jammed the paper, but it was working. 3 days ago it started again and I have been on the phone with Epson IT, losing 3 more days of work. I am told that it is a Hardware issue, after collecting several reference numbers and sending my receipt of purchase, registration of warranty and pictures of the printer inside and out, and serial number. I was told that I can get a replacement that will take 5-10 business days and I must return the old one within 7 days or get charged another $599 on my credit card. Epson is the only printer that I have purchased that did not last 2 yrs. I am deeply disappointed with the reliability and consistency of the Epson Printer

DONT BUY. Absolutely the worst printer I ever brought. I brought it for home use. The first one was a dud and I exchanged it. The second one was… Read more

rubbish. Paper jams continually despite using dry very good quality paper. The rollers that feed the paper are tiny and I have to have then replaced twice under warranty and once I had to pay. The ink system was super cheap so I brought a second one so that one can be being fixed and the other in use. That worked OK for a while. Now both need fixing. They are both less than a year old. Even the plastic casing is thin and cheap. They are just cheaply made and nasty.

EXTRA COSTS, Apon purchasing the Epson printer I tried everything to get it to connect to the wifi I even asked my tech savvy son to try with no… Read more

luck, it was a struggle to even get it to load on to my printer and to default if as my preference

I spent many hours reading and downloading to get the printer to connect, In the end I had to call a technician

As soon as the technician seen it she said this is a well-known fault with this model of Epson printers' She said she couldn't guarantee that she would be able to get it connected but would try

Thankfully she was successful and suggested I buy a cable incase I had problems down the track, as the printer does not come with a cable

I was also told that because the ink jets are liquid if you don't use the printer often, they dry up I have not had that problem as yet, and it does print well

Because of the extra $200 for a house visit by a technician, the cost of buying a cable and the trouble setting it up, even trying to get it set as a default was not easy, I would not recommend anyone to purchase this product

The rubbish bin is the best place for this printer – Absolute garbage printer. Never connected properly, printed test pages that used half the ink cartridges. Dont buy. Three it in the bin after a year of frustration.

Shafted – I was a fool to buy this JUNK the ink reader told me better than 30% for colours, replaced the black now i`m almost empty on colours ???? We should all take a class action and sue Epson ..... thank God they don`t make medical equipment!

Worst investment ever if you need to print significant amount of pages – Black ink needs replacing every 100 pages, and its cost is 1/3 of the printer itself. The printer low cost is a hook that should not misguide innocent buyers like myself. This printer is a no-go if you need to print a significant amount of pages.

Printer worked perfectly until I had to change ink. Wouldn't recognise the new genuine Epson cartridges. Took hours to sort it out. Finally got them… Read more

recognised, but it wouldn't print black. Bought a new black cartridge, but continued to say black ink was empty. Wouldn't recommend this printer.

Utter rubbish – After a couple of years of one problem after another, despite very little use, and spending a fortune on the very-expensive-but-don't-last-very-long… Read more

cartridges, I have had enough. I would like to throw it against a brick wall. I will never, ever buy an Epson printer again.

Failed after 30 months – 2720 great to start with, then ink stopped flowing to cartridges at print head. Took it to be repaired they sucked ink in to carts' and all was fine… Read more

until they emptied again. I didn't even use 25% of the ink that came with it. It's now at the local tip.